CertainTeed Driveway & Pavers Nationwide

CertainTeed Driveway & Pavers: The Sherman Oaks Owner’s Guide

We stock and install CertainTeed-compatible driveway and paver systems in Sherman Oaks, with paver driveway installation typically running $7,000-$18,000 and concrete driveway installation at $4,500-$12,000 depending on substrate condition and square footage. Most CertainTeed paver consultations include same-day measurement and a written quote before we leave the property. Homeowners usually discover a failing driveway or paver system when they notice pooling after light rain, wobbling stones underfoot, or widening gaps where polymeric sand has washed out - often after one of our dry summers followed by the first real winter storms.

Call (213) 221-0788

Which CertainTeed Models This Applies To

CertainTeed’s paver and hardscape line includes the Cambridge Pavingstones with ArmorTec series, the Rinox and Belgard-adjacent products distributed through CertainTeed’s dealer network, and the older Monogram and Landmark paver systems still present in pre-2015 Sherman Oaks installations. The critical compatibility gotcha: CertainTeed pavers manufactured before 2018 used a 60mm thickness standard, while post-2018 residential driveways shifted to 80mm for vehicular load ratings. Matching replacement pavers by color alone often leaves a height mismatch that trips edging and drains poorly.

To identify your system, check the edge restraint for a stamped date code or look for a small CertainTeed logo cast into the paver surface, usually on the spacer bars. We carry both OEM CertainTeed stock and quality aftermarket equivalents from Techo-Bloc and Belgard that match the dimensional specs while meeting or exceeding the compressive strength rating. For Sherman Oaks homes near the Santa Monica Mountains foothills, where expansive clay soil is common, we typically recommend the thicker 80mm product regardless of what was originally installed. The Haven Standard requires us to document the existing condition with photos and note the series compatibility in writing before any order is placed.

Signs Your CertainTeed Driveway & Pavers Is Failing

• Pooling water or slow drainage. The bedding layer beneath the pavers has settled or washed out, creating low spots. In Sherman Oaks, this often follows irrigation overspray against the driveway edge, which our crews see regularly near the landscaped parkways off Ventura Boulevard.
• Wobbling or rocking pavers underfoot. The joint sand has eroded, leaving voids that let individual stones shift. Left unaddressed, the paver corners chip against the bedding layer and the repair escalates from re-sanding to full relay.
• Widening gaps between stones. Polymeric sand degrades faster in direct sun, and Sherman Oaks sees more UV exposure than coastal LA. Once the sand bond breaks, weeds establish and the edge restraint starts to bow outward under thermal expansion.
• Sunken areas near the garage or street apron. The aggregate base was likely insufficient for the load concentration, or the original contractor skipped the geotextile separation layer. This is structural, not cosmetic, and patching individual pavers will not fix it.
• Efflorescence that returns after cleaning. White mineral deposits indicate moisture migration through the bedding layer, usually from a failed vapor barrier or poor subgrade drainage. Power-washing removes the symptom but accelerates the underlying deterioration.

Before

After

Replacement Cost & What’s Included

Paver driveway installation in Sherman Oaks runs $7,000-$18,000 for a standard two-car apron, with the range driven by three factors: whether the existing base is salvageable, the paver series selected, and whether we need to regrade for drainage compliance with Los Angeles County’s current runoff requirements. Concrete driveway installation, where CertainTeed’s system includes integral color and broom or exposed-aggregate finish, ranges $4,500-$12,000.

Every quote from Rowan Construction Group is a flat written price with line-item breakdown: demolition and haul-away, base preparation and compaction in lifts, bedding layer, paver or concrete placement, joint sand or control joints, and edge restraint. Under Clause 1 of the Haven Standard, that price is fixed before work starts. No change proceeds without a signed change order. The 365-Day Done Right Promise covers workmanship, and we document every phase with a photo record you receive at project closeout.

DIY or Call Us?

A homeowner can safely check the paver surface for loose stones, photograph any model stamps for identification, and verify whether water drains within thirty minutes of hosing the surface. What DIY cannot address reliably: base compaction requires a plate compactor and moisture-controlled lifts, and getting the pitch wrong traps water against the foundation or garage slab.

The real risk is in the substrate. We’ve pulled up “repaired” driveways in Sherman Oaks where the owner added new pavers over a failing base, and within two seasons the same settlement pattern returned. The cost to fix it twice always exceeds doing it once. If you’re seeing sunken areas or drainage that hasn’t improved with new joint sand, call (213) 221-0788. We’ll measure, photograph, and deliver a written estimate with no pressure to proceed. Measure twice, write it down, then build it.

FAQs