Techo-Bloc Driveway & Pavers Nationwide

Techo-Bloc Driveway & Pavers: The Sherman Oaks Owner’s Guide

Techo-Bloc driveway and paver repair in Sherman Oaks typically runs $7,000-$18,000 for full replacement and $400-$2,500 for targeted repairs, with most Techo-Bloc-compatible materials available for next-day install. We stock the Bloc 80mm pavers, Antika slabs, and the specialized edge restraints that fail first on Valley installations. Most Sherman Oaks homeowners notice the problem after winter rains, when subsurface settling creates visible lippage between units or when the herringbone pattern along the driveway apron starts spreading under the weight of daily parking.

Call (213) 221-0788

Which Techo-Bloc Models This Applies To

Techo-Bloc produces several lines that appear regularly in Sherman Oaks, and the part you need depends on which system was originally installed. The Bloc 80mm and Bloc 60mm are the workhorse driveway pavers here, rated for vehicular load with a minimum 8,000 psi compressive strength. The Antika and Victorian lines show up on older estate properties south of Ventura Boulevard, while Industria and Proma slabs are common for modern installs in the hills above Mulholland.

To identify your exact unit, look for the Techo-Bloc stamp on the paver edge, usually on the vertical face of a border course. The stamp includes the production run and the specific line name. If the stamp is worn, measure the unit thickness (60mm vs. 80mm is the critical distinction for driveway load rating) and note the chamfer style, rounded versus beveled. OEM Techo-Bloc units match color lots precisely, which matters on repairs where you’re blending new into weathered. We also source quality equivalents from Belgard when the original Techo-Bloc color has been discontinued, which happens on lines older than eight years. Rowan Construction Group Sherman Oaks is an independent service provider, not affiliated with Techo-Bloc.

Signs Your Techo-Bloc Driveway & Pavers Is Failing

• Lippage between units. One paver sits higher than its neighbor, creating a trip hazard and a place where water pools. This usually means the bedding sand has washed out or the base course has settled unevenly, common in Sherman Oaks where the clay-heavy soil expands and contracts through dry summers and brief, intense winter rains.
• Spreading pattern, especially at the apron. The interlock geometry loosens and the field pattern drifts toward the street. This happens when edge restraints fail, often because the spiked plastic restraint has cracked from UV exposure or the concrete haunch along the perimeter has fractured under vehicle loading.
• Efflorescence that returns after cleaning. White mineral bloom on the surface indicates moisture is moving through the joint sand and carrying salts upward. Persistent efflorescence points to a compromised drainage bed or joint sand that has degraded to the point it’s no longer shedding water properly.
• Sunken areas near downspouts or irrigation heads. Localized settlement suggests water is undermining the compacted aggregate base. In Sherman Oaks, we’ve traced this repeatedly to irrigation leaks that run undetected through summer, softening the base course before homeowners notice the visual dip.
• Joint sand loss and weed growth. Polymeric sand that has broken down allows seeds to root and water to penetrate. Once weeds establish, their root systems accelerate joint degradation and can lever individual pavers out of plane within a single growing season.

Before

After

Replacement Cost & What’s Included

The wide range on full replacement reflects three variables: driveway square footage, whether the existing base can be salvaged or must be fully excavated, and whether we need to address drainage that was never properly graded in the original install. Under Clause 1 of the Haven Standard, you receive a written flat price before any work starts, with every line item specified, including the paver series, the base aggregate depth, and the joint sand type. No change proceeds without a signed change order, which is the discipline that has kept our projects within a few percent of the agreed cost across 4,000-plus jobs since 2007. The 365-Day Done Right Promise covers the installation; manufacturer defects in the pavers themselves are handled through the Techo-Bloc product warranty.

DIY or Call Us?

There’s a honest line between what a homeowner can assess and what requires the equipment and sequencing we bring.

Safe to check yourself: Walk the driveway with a level and note where lippage exceeds 1/4 inch. Check whether downspouts discharge directly onto the paver field rather than into a drain line. Look for cracked edge restraint by probing the perimeter with a screwdriver. These observations tell us what’s happening before we arrive, and they cost nothing.

Where DIY goes wrong: Base re-compaction requires a plate compactor that delivers 5,000 pounds of centrifugal force, run in lifts no thicker than eight inches, with moisture content in the aggregate controlled precisely. Skip this and the repair settles again within two seasons. Polymeric sand must be installed on bone-dry pavers with every joint fully filled, then activated with a light, even water mist. Too much water washes the binder out; too little leaves it powdery and weak. We’ve been called to redo homeowner repairs where the sand failed in six months because the timing was off by a few hours of afternoon sun.

Measure twice, write it down, then build it. For a written flat price on your Techo-Bloc repair or replacement, call us at (213) 221-0788.

FAQs