Cover Driveway & Pavers Nationwide

Cover Driveway & Pavers: The Sherman Oaks Owner’s Guide

We stock and install Cover-compatible driveway and paver systems in Sherman Oaks, with typical installed pricing running $7,000-$18,000 for paver driveways and $3,500-$11,000 for paver patios depending on substrate condition and pattern complexity. Most Cover paver replacement jobs in the Sherman Oaks area can be scheduled within 48 hours, and we carry common Cover-compatible base materials and edge restraints on our trucks. Homeowners usually discover a Cover driveway or paver failure when they notice settling after winter rains, weed growth between joints that keeps returning, or a surface that sounds hollow when walked across - all signs the base layer or bedding sand has shifted beneath the pavers.

Call (213) 221-0788

Which Cover Models This Applies To

Cover manufactures several paver and hardscaping lines, and the right replacement approach depends on which series was originally installed. The Cover Classic series, common in Sherman Oaks homes built between 2005 and 2015, uses a 60mm paver thickness with a proprietary edge restraint system that is not interchangeable with standard PVC edging. The Cover Pro line, found more often in newer construction and recent renovations near the Galleria corridor, steps up to 80mm thickness and a different interlock geometry. To identify your series, check for a stamped model code on the paver edge, or measure paver thickness with a ruler - 60mm versus 80mm tells us which base specification and edge restraint to match.

We source OEM Cover-compatible materials where the original spec demands it, and we also stock quality aftermarket equivalents from Belgard and Techo-Bloc when the project allows. The aftermarket route saves roughly 15-20% on material cost without sacrificing structural performance, but we will not substitute without documenting the change in writing - Clause 1 of the Haven Standard requires the price and spec to match before any work starts.

Signs Your Cover Driveway & Pavers Is Failing

• Sunken or uneven sections. The bedding sand or aggregate base has washed out or compacted unevenly, often where downspouts discharge or where the original base was installed without proper slope. In Sherman Oaks, we see this most on properties with clay-heavy soil near the Los Angeles River drainage zone, where seasonal expansion and contraction works the base loose over five to seven years.
• Persistent weeds growing through joints. The polymeric sand between pavers has degraded or was never properly applied, allowing seeds to reach the bedding layer below. This is not a surface problem - pulling weeds does not fix the joint failure underneath.
• Hollow or ringing sound when walked on. The paver has lost contact with the bedding sand beneath it, creating a void. This usually means the base has settled locally or the bedding layer was screeded unevenly during original installation.
• Pavers shifting out of pattern. The edge restraint has failed or been undermined, allowing the field to spread laterally. Cover’s Classic series edge restraint is particularly vulnerable to this if the installer’s spikes missed the concrete bond beam or were undersized for the soil type.
• Standing water after light rain. The original slope has reversed due to base settlement, or the permeable joint material has clogged with fine sediment. In Sherman Oaks’s occasional heavy winter storms, this accelerates freeze-thaw damage even though true freezing is rare - the real problem is water working continuously against the substrate.

Before

After

Replacement Cost & What’s Included

Cover paver driveway replacement in Sherman Oaks runs $7,000-$18,000 installed; paver patios run $3,500-$11,000. The range reflects three variables: whether we can reuse existing pavers (saves 30-40% on materials), the condition of the aggregate base (complete excavation and recompaction adds $1,500-$3,500), and the pattern complexity - herringbone and basketweave patterns take roughly 20% more labor than running bond.

Every quote we write breaks out parts and labor separately, and we specify the paver source, base aggregate depth, and compaction spec in writing before any work starts. Our 365-Day Done Right Promise covers the installation; material warranties vary by manufacturer and are documented on the same page as your price. No change proceeds without a signed change order, which is how we’ve kept projects within a few percent of the agreed number across 4,000-plus jobs since 2007.

DIY or Call Us?

There is no high-tension danger in paver work the way there is with garage door springs or electrical panels, but DIY paver repair still goes wrong predictably. A homeowner can safely check whether a paver is loose by hand and whether the edge restraint is visibly displaced - these observations help us when you call. What DIY cannot fix properly is base compaction: without a plate compactor, proper aggregate gradation, and a laser or string-level screed setup, the repair will settle again within one or two rainy seasons.

We have also seen homeowners damage adjacent pavers with improper lifting tools or by using polymeric sand without first drying the joint cavity completely - the sand hardens prematurely and traps moisture against the paver edge. If you are weighing the time and tool rental against professional repair, call (213) 221-0788. We will review what you are seeing and give you a written price before any work starts, including a free second opinion if you already have another estimate in hand.

FAQs