Cambria Home Additions & ADU Nationwide

Cambria Home Additions & ADU: The Sherman Oaks Owner’s Guide

Cambria quartz surfaces in Sherman Oaks home additions and ADUs typically run $2,000-$6,500 installed for countertops and integrated surfaces, with full ADU projects ranging from $90,000-$220,000 depending on foundation, electrical, and plumbing scope. We stock Cambria-compatible slabs and fabrication templates, and most templating visits happen within 48 hours of the signed agreement. Most Sherman Oaks owners discover their Cambria surface needs attention when hairline cracks appear near cooktop cutouts, when seams in older ADU installations start gapping from Valley heat cycling, or when a contractor who installed generic composite instead of specified Cambria leaves them with staining that true Cambria quartz simply doesn’t exhibit.

Call (213) 221-0788

Which Cambria Models This Applies To

Cambria’s Brittanicca, Berwyn, and Torquay lines show up most frequently in Sherman Oaks ADU kitchens and primary home addition wet bars, though we’ve templated for the full palette including the matte-finish Cambria Matte collection that gained traction after 2019. The critical compatibility point isn’t the colorway; it’s the slab thickness. Cambria ships 2cm and 3cm, and ADU cabinet specs from 2015-2022 often assumed 2cm with a laminated edge, while current Sherman Oaks builds spec 3cm with a mitered waterfall. Check your original invoice for “Cambria USA” and the slab serial, usually etched on the underside near the sink cutout. OEM Cambria carries a lifetime residential warranty transferable once; aftermarket quartz marketed as “Cambria-compatible” carries no warranty and often measures 1.8cm rather than true 2cm, which throws your dishwasher clearance and reveals at the counter edge. We source factory-direct Cambria through authorized distributors in the San Fernando Valley, not seconds or gray-market slabs.

Signs Your Cambria Home Additions & ADU Is Failing

• Hairline cracks radiating from sink or cooktop cutouts. Cambria is 93% quartz with resin binder, but thermal shock from a hot pan set directly on the surface, or inadequate support at the cutout, exceeds the resin’s tolerance. The crack won’t self-arrest; it lengthens with each heat cycle until moisture reaches the substrate.
• Visible seam separation or lippage. In Sherman Oaks, ADUs with south-facing windows see slab surface temperatures exceeding 140°F while the cabinet box stays cooler. This differential movement stresses seams installed with standard epoxy rather than color-matched, flexible Cambria adhesive. The seam opens, then collects grime that makes the gap visually louder.
• Clouding or dull spots that don’t clean off. True Cambria maintains its polish through the slab, not as a surface coating. Clouding means either a non-Cambria product was substituted, or a harsh chemical (oven cleaner, acetone, high-pH stripper) has etched the resin matrix. We verify with a Mohs hardness test on site.
• Water pooling at the backsplash junction. The silicone bead fails first, but if water’s getting behind the slab, the substrate swells and pushes the Cambria outward. In Valley Glen and Sherman Oaks ADUs built during the 2019-2021 rush, we see this where plywood underlayment was used instead of cement board.
• Chipping at the edge, especially on islands with overhang. Cambria’s edge profile is ground and polished, not capped. A 12-inch overhang without corbels or a steel support rod creates a lever arm; someone sitting on the edge or a child climbing up snaps the corner. The chip reveals whether you have solid color-through Cambria or a printed pattern on generic quartz.

Before

After

Replacement Cost & What’s Included

The range depends on three factors we itemize in every written quote: slab selection (Cambria’s designer tier runs 30% above standard), edge profile complexity, and whether we’re removing a competitor’s quartz that was glued rather than mechanically anchored. Our price includes digital templating, CNC fabrication at a Van Nuys shop we’ve used since 2011, installation with color-matched epoxy, and sealing the sink and cooktop cutouts. Under Clause 1 of The Haven Standard, you receive that written price before anyone measures; under Clause 3, no change order proceeds unsigned. Our 365-Day Done Right Promise covers the installation and seam integrity. The Cambria factory warranty covers the slab itself against manufacturing defect.

DIY or Call Us?

You can safely verify what you have: photograph the underside label, measure your cutouts, and test a hidden corner with a coin, Cambria won’t scratch below a 7 on the Mohs scale. What you cannot safely do is remove a bonded slab without risking the cabinet box, the wall finish, and your back. Cambria at 3cm weighs 20 pounds per square foot; a 60-inch island section is 100 pounds of rigid, brittle material with no flex. The epoxy release requires heat guns and specialized suction equipment we’ve invested in. More critically, improper removal voids any remaining factory warranty and usually damages the substrate, turning a countertop swap into a cabinet replacement. Measure twice, write it down, then build it. For Cambria templating and installation in Sherman Oaks, call (213) 221-0788 and we’ll schedule your free estimate with a written price.

FAQs