Cambria Roofing Nationwide

Cambria Roofing: The Sherman Oaks Owner’s Guide

We stock and install Cambria-compatible roofing components in Sherman Oaks, with most repair jobs running $400-$1,800 installed and replacement systems starting at $8,000. Most Cambria parts are available same-day through our supplier network, and we carry common fasteners, ridge caps, and membrane sections on our trucks. Homeowners usually discover a problem after a Santa Ana wind event or the first heavy winter rain, when a lifted ridge cap or cracked tile lets water into the soffit line.

Call (213) 221-0788

Which Cambria Models This Applies To

Cambria’s roofing line is narrower than their countertop catalog, which is what they’re known for, but the components are specific. The Cambria Ridge Vent System (CRVS) and Cambria Composite Tile series were distributed in Southern California between 2014 and 2021, primarily through specialty lumber yards serving the San Fernando Valley. If you’re not sure whether your home has Cambria roofing, check the underside of any loose tile for a stamped “C” logo and a date code, or look for a spec label on the ridge vent housing in the attic.

The CRVS uses a proprietary 11.25-inch ridge cap with a built-in mesh baffle, standard ridge caps won’t seat properly and will gap at the edges. For the Composite Tile, the interlock profile changed slightly in 2018, so a 2016 tile and a 2019 tile won’t mate cleanly even though they look identical from the street. We source OEM Cambria where it’s still available, and for discontinued lines we fabricate compatible replacements from matching-profile components by Eagle Roofing or MonierLifetile, both of which we stock. The aftermarket route saves roughly 20-30% on parts and carries the same installation warranty from us.

Signs Your Cambria Roofing Is Failing

• Lifted or missing ridge caps after wind. The CRVS ridge cap relies on a foam closure strip that degrades faster in Sherman Oaks’ dry heat than the manufacturer originally spec’d. Once the seal breaks, the cap lifts and the baffle gaps, letting driven rain into the attic.
• Water staining at the ceiling corners or along the soffit. This usually traces to the Composite Tile’s interlock channel, where debris buildup in the valley blocks drainage and backs water under the tile. In homes near the Sepulveda Pass, we see this more often because of the eucalyptus shedding.
• Granule loss visible in gutters or at downspout outlets. Cambria’s composite tiles have a mineral surface layer that sheds when the asphalt binder oxidizes, which accelerates after about 8 years in full Southern California sun. Heavy granule loss means the waterproofing layer is exposed.
• Cracked or spalled tiles, especially on south-facing slopes. Thermal cycling in Sherman Oaks, where winter nights drop to the 40s and summer days hit the 90s, stresses the composite material. Cracks start at the fastener hole and propagate outward.
• Sagging or discolored sections near valleys or penetrations. The membrane underlayment, typically a self-adhered ice-and-water shield at these details, can delaminate if the original installer worked in high heat without proper roll pressure. Water ponds, the substrate softens, and the tile bed settles visibly.

Before

After

Replacement Cost & What’s Included

Repair work on Cambria roofing in Sherman Oaks runs $400-$1,800 depending on how many tiles, how much membrane exposure we find, and whether the fascia or soffit needs touch-up after we open the edge. Full replacement with a new system starts at $8,000 for a typical 1,800-square-foot Sherman Oaks roof and tops out around $20,000 for complex geometry, multiple penetrations, or detached garage matching.

Every quote we write breaks out parts, labor, and disposal separately. Under Clause 1 of the Haven Standard, that written price is locked before any work starts. If we open up and find damaged substrate, we stop, photograph it, and write a change order with a fixed price for the additional scope. No work proceeds on a change until the change order is signed. Our repair work carries a 365-Day Done Right Promise, and full replacements include a written warranty on both materials and installation.

DIY or Call Us?

There’s a safe middle ground here. A homeowner can walk the perimeter with binoculars, check the gutters for granule deposits, and look in the attic for daylight at the ridge line or water stains on the rafter bays. Document what you see with photos, that record helps us target the repair and saves diagnostic time.

What we don’t recommend is ladder work on a pitched composite tile roof, or removing tiles to inspect the membrane yourself. The tiles are brittle once they’ve aged in the sun, and the fastener pattern underneath isn’t always where you’d expect. More critically, the underlayment on a hot Sherman Oaks roof can be slick, and the valley flashings are sharp. We’ve seen homeowners turn a $600 ridge cap repair into a $2,400 job by breaking adjacent tiles and exposing membrane they didn’t know was there. Call us at (213) 221-0788, we’ll scope it, write the price, and handle the heights.

FAQs