Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Sherman Oaks Owner’s Guide
Cambridge Pavers driveway and paver replacement in Sherman Oaks typically runs $7,000-$18,000 for a full paver driveway installation, with repair sections starting around $2,500-$5,500 depending on base failure extent. We stock Cambridge Pavers-compatible base materials, edge restraints, and joint sand on our Sherman Oaks trucks, and most assessments are completed same-day. Homeowners usually notice the problem first as a dip near the garage apron or a wobble underfoot where the bedding course has washed out beneath the Cambridge field pattern.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers produces several lines common in Sherman Oaks installations: the ArmorTec paving stones (the OG series with surface color layer), the Sherwood series for permeable applications, and the Ledgestone wall-cap systems often used for raised planter borders alongside driveways. The critical identifier is the underside label or, more practically, the paver thickness and chamfer edge profile. ArmorTec field pavers are typically 2 3/8″ thick with a micro-bevel; Sherwood permeables run thicker at 3 1/8″ with larger spacer nibs cast into the sides.
We are an independent service provider, not affiliated with Cambridge Pavers. For matching, we bring sample boards to the site rather than relying on memory. The OEM Cambridge product is often still available, but we also source from Belgard and Techo-Bloc when the original series has been discontinued or when the homeowner wants to shift the color palette. The aftermarket decision hinges on whether your existing driveway has the ArmorTec color layer, which aftermarket pavers can approximate but rarely match exactly after five-plus years of Sherman Oaks sun exposure. Measure twice, write it down, then build it.
Signs Your Cambridge Pavers Driveway & Pavers Is Failing

- Sinking or tilting near the garage apron. This is almost always a base failure, not a paver failure. The aggregate base has compacted or washed out where the driveway meets the concrete slab, and the Cambridge pavers are simply following the ground down.
- Weeds growing through the joints in straight lines. Indicates the polymeric sand has degraded completely, which in Sherman Oaks happens faster on south-facing driveways where thermal cycling breaks down the binder. The joints are now channels for water and root intrusion.
- Pavers that rock underfoot or sound hollow when tapped. The bedding sand layer has eroded or migrated, leaving voids. Common on sloped driveways in the hills north of Ventura Boulevard where runoff velocity is higher.
- Chipping at the edges of ArmorTec pavers, exposing the gray concrete body. The surface color layer has reached its wear limit. This is cosmetic until the structural body cracks, but it tells you the driveway is past midlife.
- Standing water that wasn’t there two seasons ago. The pitch has shifted due to base settlement, or the permeable Sherwood joints have clogged with fine sediment from the Santa Monica Mountains watershed. Either way, water is no longer draining as designed.
Before
AfterReplacement Cost & What’s Included
For Sherman Oaks, here is how the pricing breaks down:
| Scope | Price Range |
|---|---|
| Section repair (100-200 sq ft, base reset) | $2,500-$5,500 |
| Full paver driveway replacement (standard 2-car) | $7,000-$18,000 |
| Concrete driveway replacement (if switching material) | $4,500-$12,000 |
| Driveway sealing (maintenance, post-repair) | $250-$700 |
The wide range on full replacement reflects three variables: how much of the base needs excavation and recompaction, whether the existing edge restraints are salvageable, and paver selection. Cambridge ArmorTec in the popular Sahara or Toffee Onyx blends sits at the higher end of material cost. Our quote includes the written scope, the photo documentation of existing conditions, and the 365-Day Done Right Promise backed by The Haven Standard. Under Clause 1, the price is written before anyone starts. No change proceeds without a signed change order.
DIY or Call Us?

There is no high-tension danger here as with garage door springs, but there is a hidden trap: the bedding course must be screeded to within 1/8″ over ten feet, and the base compaction requires a plate compactor running at the correct moisture content. Homeowners who skip the compaction lifts or overwater the base create a driveway that fails again in two seasons. What you can safely check yourself is the pitch with a 4-foot level and the joint sand condition by probing with a screwdriver. If the base is soft when you scrape down, or if the pavers sit below the garage slab edge, the fix is beyond hand tools. Call (213) 221-0788 and we will assess it, photograph it, and put the number in writing.
FAQs
Twenty to thirty years for the pavers themselves, but the base and joint sand need attention at year ten to fifteen in our climate. The thermal expansion range in Sherman Oaks, where winter nights can drop to 40°F and summer afternoons hit 105°F, accelerates polymeric sand degradation. Call (213) 221-0788 for an exact quote on your condition - estimates are free.
Yes, if the base failure is localized and the paver inventory is still available. We cut out the affected section, recompact the base in lifts, rescreen the bedding course, and reinstall. The seam is visible if you know where to look, but it is structurally sound. Call (213) 221-0788 for an exact quote - estimates are free.
Two to three days for a typical 150-square-foot section: one day for excavation and base prep, one day for bedding and laying, and a half day for joint sand and compaction. Full driveway replacements run five to eight days depending on access and weather. Call (213) 221-0788 to schedule your free estimate.
We stock base rock, bedding sand, polymeric sand, and edge restraints on every Sherman Oaks truck. The pavers themselves are project-specific and ordered once the color match is confirmed on site. We maintain sample boards for Cambridge, Belgard, and Techo-Bloc lines so the selection happens during the first visit, not as a second trip. Call (213) 221-0788 for an exact quote - estimates are free.
Ready to get a written price before any work starts? Call Rowan Construction Group Sherman Oaks at (213) 221-0788 to schedule your free estimate. Every project includes a documented photo record, background-checked uniformed crews, and our 365-Day Done Right Promise backed by The Haven Standard. Bring a competitor’s written quote and we will review it line by line at no charge.
Written by Grant Rowan, Owner, Rowan Construction Group Sherman Oaks at Rowan Construction Group Sherman Oaks, serving Sherman Oaks and nearby areas.







Before
After
Before
After
Before
After