Wellborn Driveway & Pavers Nationwide

Wellborn Driveway & Pavers: The Sherman Oaks Owner’s Guide

We stock and install Wellborn-compatible driveway and paver systems in Sherman Oaks, with typical installed replacement costs running $7,000-$18,000 for paver driveways and $3,500-$11,000 for paver patios depending on substrate condition and square footage. Most Wellborn paver inquiries we handle involve settling, drainage failure, or edge restraint collapse after 8-15 years of Valley freeze-thaw cycles and the occasional root intrusion from the mature ficus and magnolia trees common along Chandler Boulevard and the hillside streets north of Mulholland. You’ll usually notice the problem first as a wobble underfoot, standing water after light rain, or pavers that have migrated half an inch from their original line.

Call (213) 221-0788

Which Wellborn Models This Applies To

Wellborn’s hardscape line isn’t as broad as their cabinet catalog, but the pavers and retaining-wall systems they distributed through select California dealers between 2008 and 2019 show up regularly in Sherman Oaks hillside installations and courtyard projects off Ventura Boulevard. The most common call we get involves the Wellborn Pro-Lock edge restraint system and the accompanying 60mm and 80mm paver units sold under the Wellborn Hardscapes label.

To identify your specific system, check the paver bed for a stamped “WB” or “Wellborn” mark on the spacer nibs, typically visible on the vertical edge of a lifted unit. The Pro-Lock edge restraint uses a black PVC profile with a distinctive double-channel design, not the single-tab version you’ll see from Belgard or Techo-Bloc. Measure your paver thickness carefully: Wellborn’s 60mm nominal pavers often measure 55-58mm actual, while the 80mm units run 75-78mm. This half-centimeter variance matters when matching to modern equivalents, since Techo-Bloc’s 60mm line runs true to nominal and can create a lippage issue if mixed blindly.

We source OEM-matched Wellborn-compatible units where the original spec matters for warranty continuity, but we’ve also had clean results with Belgard’s Dublin Cobble and Techo-Bloc’s Eva lines as functional equivalents when the original Wellborn SKU is discontinued. The decision hinges on whether your installation is part of a larger HOA-matched hardscape or a standalone driveway where visual continuity with neighboring properties isn’t a constraint.

Signs Your Wellborn Driveway & Pavers Is Failing

• Individual pavers rock underfoot. This usually means the bedding sand layer has washed out or compacted unevenly, often from a failed edge restraint that let the perimeter spread. In Sherman Oaks, the clay-heavy soil on north-facing slopes accelerates this once water finds a path through.
• Standing water 30 minutes after rain stops. The original pitch has failed, either from substrate settlement or from tree-root heave. We’ve traced this repeatedly to roots from mature camphor trees planted in the parkway strip between sidewalk and curb on streets like Noble Avenue and Longridge.
• Pavers migrating outward from the pattern line by more than 3/8 inch. The Pro-Lock edge restraint has cracked or pulled its spikes. The PVC becomes brittle after a decade of UV exposure, and the 8-inch galvanized spikes used in original installs corrode in our alkaline soil.
• Efflorescence that returns after cleaning. White mineral deposits indicate moisture is moving through the base from below, typically because the geotextile fabric has degraded or the initial base layer was installed without adequate drainage slope toward the street.
• Cracked pavers in a linear pattern. This isn’t random failure; it tracks a control joint or construction seam in the concrete substrate beneath. Wellborn pavers installed over existing concrete without proper isolation membrane show this signature failure mode in roughly 60 percent of the cases we’ve opened up in the Valley.

Before

After

Replacement Cost & What’s Included

For Sherman Oaks properties, our installed pricing breaks down as follows:

The range driver is almost always what’s underneath. A driveway with intact aggregate base and proper drainage slope might need only paver lifting, bedding sand refresh, and new edge restraint. A job where the base has turned to mud from a broken irrigation line or where we need to install a new French drain to daylight at the curb runs toward the higher end. Under Clause 1 of the Haven Standard, you get the written price before we touch a paver. The quote is flat, line-itemed, and includes a 365-Day Done Right Promise on workmanship. We pull permits when the city requires them, which in Sherman Oaks applies to any driveway replacement affecting the curb cut or sidewalk approach.

DIY or Call Us?

There’s a honest middle ground here. A homeowner can safely lift a few pavers to check bedding sand depth or confirm edge restraint condition with a flat pry bar and gloves. What we don’t recommend is attempting full-base correction or compaction without proper plate compactor experience and grade laser. The risk isn’t injury so much as redo cost: a DIY re-lay that doesn’t achieve 95 percent modified Proctor density on the base course will fail again in two winters, and you’ll pay twice for the same pavers.

We carry Wellborn-compatible edge restraint, bedding sand, and select paver units on our Sherman Oaks truck for assessment calls. If your pattern is discontinued, we’ll photograph the existing unit, measure to 0.5mm, and source the closest visual match before any demolition starts. Call (213) 221-0788 to schedule your free estimate. We’ll show you the photo record from a similar job so you know what the process looks like before you decide.

FAQs