Wellborn Kitchen Remodeling Nationwide

Wellborn Kitchen Remodeling: The Sherman Oaks Owner’s Guide

Wellborn kitchen remodeling in Sherman Oaks typically runs $14,000-$45,000 for a full project, with cabinet installation alone ranging $4,000-$13,000 depending on series and kitchen layout. We stock Wellborn-compatible components across the Classic, Premier, and Estate series, and we carry common hardware, hinge sets, and drawer glide replacements on our trucks for same-day resolution of most part failures. Most Sherman Oaks homeowners discover a failing Wellborn component when a drawer starts catching near the Galleria corridor’s older soft-close glides, or when a cabinet door in a Ventura Boulevard condo no longer holds its adjustment after years of the Valley’s dry heat cycling the wood.

Call (213) 221-0788

Which Wellborn Models This Applies To

Wellborn organizes its cabinetry into three main series, and the parts are not interchangeable between them. The Classic Series uses standard 35mm cup hinges and 75-pound-rated side-mount drawer glides; the Premier Series upgrades to 105-pound soft-close undermount glides and concealed six-way adjustable hinges; the Estate Series runs full-extension 150-pound glides with integrated soft-close dampers and custom bored hinge patterns that require Estate-specific mounting plates. To identify your series, check the interior sticker on the hinge side of any upper cabinet, or measure your existing glide: Classic side-mounts measure approximately 22 inches for a standard base drawer, while Premier and Estate undermounts run 21 inches with a rear locking bracket.

We source OEM Wellborn hardware direct from the Alabama factory for Estate and Premier jobs where color match and warranty alignment matter. For Classic Series repairs in Sherman Oaks, we often recommend quality aftermarket equivalents from Blum or Salice that meet the same cycle-life specs at lower replacement cost. The gotcha: Estate Series hinge plates use a 3mm offset bore pattern that aftermarket plates rarely replicate, so mixing OEM and aftermarket on Estate doors usually means redrilling the stile, which voids the original finish warranty. We check this before we quote.

Signs Your Wellborn Kitchen Remodeling Is Failing

• Drawer fronts sag or tilt when loaded. The glide’s polymer bearing retainer has cracked, a common failure in Sherman Oaks after 8-12 years of Valley heat accelerating plastic fatigue. The drawer still moves, but the load rating drops by half and the box eventually jams.
• Soft-close feature stops working; drawers slam shut. The integrated damper cartridge has leaked its silicone fluid or the piston seal has worn. On Wellborn Premier glides, this is a non-serviceable component; the entire glide assembly requires replacement.
• Cabinet door hangs crooked and adjustment screws won’t hold. The hinge cup has wallowed out in the particleboard stile, or the mounting plate screws have stripped their pilot holes. This happens faster near south-facing windows where daily thermal expansion loosens the press-fit.
• Finish peeling or discoloring at door edges. Wellborn’s conversion varnish breaks down at the stile-and-rail joints when humidity swings exceed 20% seasonally, which is typical in Sherman Oaks homes without whole-house humidification.
• Sink base cabinet floor swelling or softening. The marine-grade plywood upgrade was skipped at original purchase, and the standard particleboard core has wicked moisture from a slow plumbing drip. We see this most in 1990s-2000s Classic Series installs in the hills north of Ventura Boulevard.

Before

After

Replacement Cost & What’s Included

Wellborn kitchen remodeling in Sherman Oaks breaks down as follows:

What drives the range: kitchen square footage, whether we are reusing existing boxes or replacing them, electrical and plumbing relocation needs, and the Wellborn series selected. Estate Series runs roughly 40% above Classic on material cost alone. Every quote we deliver in Sherman Oaks is a flat written price with line-item breakdown; under Clause 1 of the Haven Standard, no work starts until that number is agreed in writing. Our 365-Day Done Right Promise covers the installation, and we pull all required permits with Los Angeles Department of Building and Safety, passing inspection before we consider the job closed.

DIY or Call Us?

There is safe checking, and then there is work that belongs to someone with the right tools and liability coverage. A homeowner can verify their Wellborn series from the interior sticker, measure a failed glide with a tape measure, and confirm whether a door is hanging on its factory screws or a previous repairer’s wall anchors. What goes wrong fast: drilling new hinge cups freehand without a 35mm Forstner jig, which guarantees misalignment and split stiles; or removing a loaded drawer box without supporting the glide rails, which bends the stamped steel and turns a $45 glide replacement into a $400 drawer rebuild. The soft-close dampers on Premier and Estate series are under spring tension; releasing them without a glide clamp can snap the polymer housing into your hand or face. We carry replacement glides, hinges, and mounting plates on our trucks for Classic and Premier series; Estate hardware we order to color match, typically 5-7 business days from the Alabama factory. Call (213) 221-0788 to schedule your free estimate. We’ll identify your series, photograph the failed component for your record, and deliver a written price before any work starts.

FAQs